Oregon E72 PowerCut Replacement Chainsaw Chain for 20-Inch Guide Bars, 72 Drive Links, Pitch: 3/8", .050" Gauge Grey

The Oregon PowerCut E72 replacement 20-Inch Chainsaw Chain is designed to fit a range of different chainsaw models, and features a 72 drive link chain with 3/8-inch pitch and .050-inch gauge. These specifications make it perfect for loggers and tree care professionals, promising exceptional durability, efficiency, and precision. The durable chrome outer layer and hardened rivets prevent wear and reduce the need for chain adjustments, while the full chisel cutters enable it to power through timber with an excellent degree of speed. For saw sizes 50-100 cc. This saw chain met the kickback performance requirement of ANSI B175.1-2012. Features LubriTec - Oregon's next-generation oiling system, designed to extend the guide bar and saw chain life. Compatible with many chainsaw makes and models, including (but not limited to): Husqvarna 365, 395XP, 455 Rancher, 460, 51, 55 RANCHER, 562XP, 572XP, and 61 Poulan PP5020AV 20"" Gas-Powered Saw Stihl MS 290, MS 311, and MS 391 Saw chain identification: Always refer to the number stamped on the drive link of your old chain to assure correct gauge and pitch, or refer to your owner’s manual, to order the correct part to fit your saw chain. • Chain gauge is the drive link's thickness where it fits into the guide bar groove, matching the guide bar gauge • Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by 2 • Your guide bar length is stated in the manual, and is the length of the long bar from end to tip (not the full length of the chainsaw). See Oregon’s fitting guide.