Severely Rusted Steel Wheel - Perfect Wheel Restoration

Video Description

For this weeks video ive decided to get back to basics before making a start on the more complex projects ive got lined up including another big project ;) So this time i decided to restore a super rusty spare wheel i had lying around the yard, As you can see it has definitely seen better days and is in dire need of being rescued, Really Random Channel to the rescue! So the first thing i done was to get it up on the work bench and give it a goon inspection to make sure there are no cracks or major dents that would stop me restoring it, as you can tell the wheel checked out just fine and i could crack on with removing the tyre or tire if you prefer ;) The tyre ware removed on my tyre changing machine, first the valve was removed then the bead was broken with the bead breaker and then mounted onto the machine and the tyre gets levered over the shoe and the machine rotated to lift the tyre up and over the rim and voila one removed tyre. Once i had the tyre off and disposed of the valve was removed from the rim, the only way to remove these valves is by cutting them out so thats what i did, a sharp Stanley made short work of it... and yes there were a few spiders hiding in that web around the valve neck! the wheel is then given a thorough scrubbing and pressure washing with APC and water, this removed all of the green mildew, spider webs and any loose rust as well as dissolving any rogue grease and grime. Once dry the now clean rim was loaded into the media/sand blaster and given a 100 psi scrubbing to remove all traces of rust. This leaves the wheel nice clean but with lots of little pits where the rust had been eating into the steel so this will be addressed in the next step. U-pol body filler is used to fill in the heavy pitting that the rust caused and after sanding leaves me with a nice smooth surface ready for some high build primer to remove any last imperfections that the filler may have missed. I hung and panel wiped the rim in preparation for the next stage which is etch priming the bare steel so that the high build 2k has a base to grip onto. Once this is applied and cured i head back to the bench to wet flat the primer back to a perfectly level surface, This is where the super glossy finish is created. After i cleaned the wheel thoroughly to remove all sanding residue, i mixed up some 2k Gloss black and gave the wheel 3 coats to achieve full coverage and minimum thickness to avoid chipping on the edges when tyre fitting or bolting to the car. After this was cured it was simply a case of fitting a new tyre, new valve inflating and standing back to admire my work and be satisfied in the knowledge i fought the battle against rust and triumphed once more! Thank you for watching and i hope to see you in the next video :) ------------------------------------------------------------------------------------------------------------------- A new addition to my videos from now on will be a water mark and my channel name popping up in random places throughout the video as im getting rather tired of people re-uploading my content as their own i hope you guys understand. If you like what you see and have any ideas for the channel or would even like to donate something to restore to the channel please get in touch. :) And as usual if you liked the video please like share and subscribe and help the channel grow. If you would like to help support the channel you can find my patreon account here- http://patreon.com/RRCRestoration More videos can be found here- https://www.youtube.com/channel/UCKWkhqAHjW4x2oRK_yzpxlA/videos?view_as=subscriber #Restoration #wheel #Rusty Really Random Channel Severely Rusted Steel Wheel - Perfect Wheel Restoration