How To Install Your Own DIY Solar System | No More Power Bills!

Video Description

DIY Home Solar (Save $1,000's Going DIY): https://geni.us/qN9Ot WAGO 613 Lever Nuts - https://geni.us/3QQS1v Chiptoolz Rafter Locator - https://geni.us/segX Iron Ridge FlashFoot2 - https://geni.us/lZZjAX I started the process a couple months back on eliminating my power bill by doing a DIY installation of 4.8kW Solar System on my home. I used Project Solar who helped with the design, hardware selection, engineering prints, submitting permits, and working with my utility for Net Metering. Overall this process was smooth and I wanted to document the complete DIY installation to help you do the same at your home. You can save a substantial amount of money but this is a major DIY project so only take on a project like this if you can perform all steps safely and within your skill set. Additional Materials Purchase 1) 20 Amp Breaker (Enphase Envoy) 2) 20 Amp Breaker (Main Panel) 3) Roofing Caulk 4) PVC Schedule 40 Conduit and Fittings 5) 10/2 Romex 6) 4x4 Metal Junction Box 7) WAGO 221 Lever Nuts 8) Grounding (3-wire) Busbar 9) 1x3 boards (used for mounting on siding) Chapters 0:00 Intro 0:30 Layout of Solar Panels on Roof 1:34 How To Design Your Solar System Layout 2:15 Installing Iron Ridge FlashFoot2 Mounting Anchors 11:18 How You Can Do Your Own DIY Solar Installation 12:38 Installing Solar Rails 15:59 Enphase Micro Inverter Installation 18:24 Installing the EZ Solar Junction Box 22:49 Wiring Enphase Micro Inverters 25:04 Wiring 2 Solar Arrays Together in the Attic 28:21 Installing Solar Main Disconnect and Enphase Envoy 30:57 Wiring An Enphase Envoy and Main Disconnect 38:38 Mounting Solar Panels 41:50 Finished Product DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.