1970s Rebar Cutter Restoration

Video Description

I recently acquired a vintage rebar cutter from a used Japanese tool store.I'm not sure of the exact year of manufacture, but based on my research, machines of this type were produced by an old Japanese company since the 1970s. The machine was in a state of disrepair, completely covered in rust and unable to operate. Upon closer inspection during restoration, I found a fractured bearing race and several other components exhibiting severe rust and corrosion.Let's all watch the results together! *Rebar Cutter Information * Brand: ‎SCC Model: EC-01 AC: 1 Phase Hertz: 50 Hz Voltage : ‎100 Volts AMP: 9 A Output power: 500W No load speed: 17000 Rpm Cutting diameter : 16mm Blade Material : Metal Product Dimensions : 470x 270x 170mm Item Weight :20 kg ------------------------- Timestamps: 00:00 Check the operation 00:21 preview 00:48 disassembling 13:23 cleaning the parts with the parts washer 14:27 reinstall the part for sandblasting 15:52 sandblasting 16:03 showing the sandblasted parts 17:17 restoring the body 18:47 restoring the machine head 20:00 blacken the screws 20:22 clean and check the rotor 21:08 clean and check the Stator 21:37 restoring the switch 25:24 install bearings 25:53 assemble the body gear 26:44 assemble rotor and stator 28:44 connect the power cord and switc 31:59 test run the electric motor 32:09 welding the domed cap on the tube 32:42 assemble the reduction gear 35:07 machine head assembly 37:37 reassemble the technical data sheet 38:58 pour engine oil 39:15 check the entire operation and test cut the steel 40:14 showing the finished restoration ------------------------- Like and subscribe to support the channel ^^ Thank you so much for watching !! Have a nice day ^^ #restoration #restorationvideos #restore #repairwork #MCC # #MCCEC-01 #ElectricRebarCutter #rebarcutter