Restoration Rusty KNIFE- Blade REFORGED

Video Description

Hi! The rusty knife restoration today. But this knife is unknown to me. I do not know what type of knife this is, what its history is, but I liked its shape. The condition is poor, the handle is broken, deep rust, there is not enough blade width. But I'm going to restore it now. First of all, I disassembled the handle, which was primitively secured with a nut and riveted. The blade was placed in a rust remover. The guard has a wide hole covered with lead. Perhaps it was previously fixed with this lead. While the blade was being cleaned, I cleaned the guard, adjusted the shape, and closed the huge hole under the shank of the knife, soldering the hole with a cut piece of brass. Also, the guard was missing one part, which I hand-chiseled and soldered with silver. After working with the guard, I moved on to restoring the knife itself. After cleaning the rust, I put the blade in warm water with baking soda to neutralize the acid. Then I sanded and adjusted it and started restoring the blade. To do this, I used the blade of an old hand saw. I cut out the desired shape. Next, I welded a piece of steel to the knife by welding. After that, I heated the blade and added borax. And he began to forge. Having forged all the seams, I cleaned it, shaped it and tempered it in warm oil. After quenching, I carried out heat treatment and then switched to sanding. I sanded the blade with stones and sandpaper. Next, the restoration of the handle. First, I cleaned all the parts of the handle in warm water with cleaning agents. All the parts were made of plexiglass. After cleaning and sanding, I drilled the right hole in the guard for the shank of the knife and began to assemble the handle. For the handle, I added pieces of leather and brass. I glued everything together with epoxy resin and tightened it with a decorative nut. After drying, I treated the handle the next day. And gave it the right shape. I also sanded the handle with sandpaper and finally rubbed it well with oil. After that, I moved on to doing the sheath. I chose a primitive, simple scabbard. I just needed to create a case in which to store the knife itself. Furthermore, I also made a belt hanger for these sheath and, of course, a lockable strap. As usual, I conducted a test for you. I hope you enjoyed this restoration. Please don't forget to share this video. Sincerely, Alex. Thanks for attention! Good luck and health to everyone! With best wishes, Alex! Please subscribe to my channel: @ScrewsAndTools 🍖 My New Cooking channel! @screwsandtoolscooking Patreon: https://www.patreon.com/Screwsandtools Paypal: paypal.me/screwsandtools Facebook: https://www.facebook.com/scresandtools/ Instagram: https://www.instagram.com/screwsandtools/ #screwsandtools #knife #restoration